Double Sided / Single Drawer

UV exposure Unit


  • Energy to resist surface 25-27mj/cm²/sec
  • 7 Memories
  • Soft vacuum for photo-imagable liquid resists
  • Automatic vacuum and exposure start
  • Inexpensive lamp replacement costs
  • Unit diagnostics
  • Fast vacuum
  • Glass-to-glass option
  • Low maintenance
  • Switched power settings
  • Integrated exposure control
  • Single or double side selection
  • Quick change polyester vacuum sheet
T3000 Series 4

The Model T3000 is an extremely well proven single drawer, double sided exposure unit, designed with medium volume production in mind. This unit is ideal for fast primary imaging on dry film resists. It is also suitable for those users that require occasionally to expose liquid photo-imagable solder masks without the expense of a dedicated unit.
All the main functions of the ModeI T3000 are controlled by a dedicated microprocessor with all variables and options such as exposure, vacuum delays and vacuum modes being held in each of its seven memories.
Exposures are controlled by the inbuilt light integrator system which accurately measures the amount of UV energy available ensuring repeatable exposures throughout the life of the lamps.
The specially designed lamps have a major peak of energy at 365nm which closely matches the spectral response of the majority of dry film and liquid resists currently available. The energy output of this lamp can also be determined with three switched preset levels, allowing excellent control of exposure.
As standard, the Model T3000 has a well proven low profile vacuum frame which includes a specially designed hard wearing moulded seal. This facilitates very quick changing of the polyester sheet and a fast evacuation of the vacuum drawer. The system also helps to eliminate upper photo tool shift.
In addition full or soft vacuum can be selected within each memory and a variable vacuum delay can be entered to ensure the vacuum is stable before the exposure commences. The Model T3000 is a well proven exposure unit with a fast and accurate capability. Engineered to last and with ease of maintenance in mind, the Model T3000 will give many years of reliable hard work.

Optional Accessories
A low vacuum glass to glass system that can be fitted to replace the standard embossed polyester to glass assembly.
This unique system allows pcb panels of varying thicknesses from O.2mm to 3mm to be processed at a high through-put and with accurate alignment of photo tools.
Various registration systems are available, with or without vacuum photo tool retention, for either the standard frame or the glass to glass frame and can be engineered to suit most customers requirements.



Maximum frame exposure area (standard)
610 x 610mm
Maximum board size
660 x 660mm
Loading height, from floor
Maximum UV energy @ glass
Selectable power settings
1kw, 2kw, 3kw
Spectral emission of lamp (standard)
Spectral emission of lamp (optional)
Electrical supply
380/400v - 3ph+N - 50Hz - 25amps
Exhaust air
660m³/hr (fan & 2m hose supplied)
Overall dimensions (LxWxH))
183 x 90 x 175cm
Back to Top

| Reconditioned| Exposure Units | Registration Systems | Miscellaneous |UV Curers|Consumables|